:
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Nitrogen or Argon in Electric furnace
-Because the inhibition of oxidization of sample
What is a GSCM?
Integrating Environmental Thinking into Supply Chain Management, including
Product design
Material sourcing and selection
Manufacturing processes
Delivery of the final product to the customers
End-of-life management of the product after its useful life
Energy-saving facility investment tax deduction
Deduct 10% of corporate tax when local company invest in energy-sav
1. 용접의 개념
금속과 금속을 충분히 접근시키면 이들 사이에는 뉴튼의 만유인력에 따라 금속 원자간에 인력이 작용하여 서로 결합하게 된다. 이 결합을 이루려면 원자들을 10nm정도 접근시켜야 하는데 이와 같은 일은 평상시에는 일어나지 않는다. 그 이유는 보통조건에서는 금속표면에 산화막이 존
MOCVD : MOCVD 란 금속유기원료 (Metal Organic Source)를 이용하여 막을 형성시키는 방법으로 precursor의 분해온도가 낮다. MOCVD의 장점은 성막 속도가 빠르고, Step Coverage가 우수하며, 막 조성 및 성막 속도 제어가 가능하다. 또한 기판이나 결정표면의 손상이 없는 장점이 있다. 단점으로는 Source와 반응 가스들 중
oxidation of fats which cause rancidity. It also includes processes to inhibit natural aging and discoloration that can occur during food preparation such as the enzymatic browning reaction in apples or potatoes, etc. Some preservation methods require foods to be sealed after treatment to prevent recontamination with microbes; others, such as drying, allow food to be stored without any special co
Electrolyte를 붙이거나 하는 방법 등이 있다.
Polyelectrolytes를 붙임을 통해 Metal oxide Nanotube를 만드는 방법을 살펴보면, 우선 틀이 되는 CNT에 Layer-by-Layer assembly를 통해 polyelectrolytes를 붙인다. 그 다음, 이온화합물 상태의 목표 금속(산화물이 될)을 이온 상태의 복합체 (Ion Complex)를 형성할 수 있도록 준비한
51. Celler-Kefauver Antimerger Act : This act, passed in 1950, made it illegal in certain circumstances for a firm to merge with another by purchasing its assets. This strengthened the Clayton Act.
셀러-케파버 반합병법 : 1950년에 통과된 법령으로 특정한 상황에서 한 기업이 다른 기업의 자산을 구매하여 합병 하는 것을 불법으로 만들었다. 이것은
1.Photolithography
리소그래피는 포토레지스트를 도포하는 공정으로 시작해 노광, 현상, 에칭, 포토레지스트 제거에 이르는 일련의 프로세스이다. 현상까지를 레지스트 처리공정으로 하며, 에칭 공정과 분리해서 생각할 수도 있다. 현재, 패턴 노광은 레티클이라 불리는 마스크 기판에 의해 축소 투영 전
Ⅰ. 철의제조
1. 철의 기원
고고학에 의하면 철의 기원은 인류가 불을 사용하여 철보다 상대적으로 낮은 가공온도를 갖고 있는 청동을 가공하면서부터 시작되었다고 한다. 그러나 철은 부식하기 쉬운 성질 때문에 오래된 유품이 별로 없고 따라서 정확한 철기문화의 시작시기를 추정하는데 어려움이